310 lines
12 KiB
XML
310 lines
12 KiB
XML
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!-- edited with XML Spy v4.0 (http://www.xmlspy.com) (SISCO/Engineering) -->
|
|
|
|
<!-- ****************************************************************** -->
|
|
<!-- * SISCO MODULE HEADER ******************************************** -->
|
|
<!-- ****************************************************************** -->
|
|
<!-- * (c) Copyright Systems Integration Specialists Company, Inc., -->
|
|
<!-- * 2001 - 2004, All Rights Reserved -->
|
|
<!-- * -->
|
|
<!-- * MODULE NAME : osicfg.xml -->
|
|
<!-- * PRODUCT(S) : MMSEASE-Lite -->
|
|
<!-- * -->
|
|
<!-- * MODULE DESCRIPTION : Configuration File for Lean-T Stack -->
|
|
<!-- * -->
|
|
<!-- * This file is used to set the log masks used to control -->
|
|
<!-- * logging performed by the MMS-EASE Lite Debug Libraries, -->
|
|
<!-- * as well as to set memory debug flags. This module is -->
|
|
<!-- * read by the source module 'osicfgx.c'. -->
|
|
<!-- * -->
|
|
<!-- * MODULE DESCRIPTION : -->
|
|
<!-- * -->
|
|
<!-- * Configuration file for Lean-T Stack -->
|
|
<!-- * -->
|
|
<!-- * The configuration file has three sections. -->
|
|
<!-- * The order of sections in the configuration file is relevant: -->
|
|
<!-- * -->
|
|
<!-- * Network -->
|
|
<!-- * -->
|
|
<!-- * Transport This section may be empty (default parameters -->
|
|
<!-- * will be used). -->
|
|
<!-- * -->
|
|
<!-- * Addressing This section should be present to -->
|
|
<!-- * properly terminate parsing of cfg file. -->
|
|
<!-- * -->
|
|
<!-- * Note: Most parameters are optional unless stated that -->
|
|
<!-- * they are mandatory. If an optional parameter is -->
|
|
<!-- * not configured in this file a default value will -->
|
|
<!-- * be used. -->
|
|
<!-- * -->
|
|
<!-- * MODIFICATION LOG : -->
|
|
<!-- * Date Who Rev Comments -->
|
|
<!-- * ======= ===== === ========================== -->
|
|
<!-- * 01/27/04 ASK 04 Commented out DTD and Schema references -->
|
|
<!-- * 01/15/04 EJV 03 Added Rfc1006_Max_Spdu_Outstanding -->
|
|
<!-- * 11/05/01 GLB 02 Added MMS section -->
|
|
<!-- * 08/31/00 GLB 01 Module created from existing lean.cfg -->
|
|
<!-- ****************************************************************** -->
|
|
<!--
|
|
#############################################################################
|
|
# NOTE: Descriptions of parameters are at the bottom of this module.
|
|
###########################################################################-->
|
|
|
|
<!-- Uncomment to use DTD / Schema
|
|
<!DOCTYPE STACK_CFG SYSTEM "..\osicfg.dtd">
|
|
<STACK_CFG xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="..\osicfg.xsd">
|
|
-->
|
|
|
|
<STACK_CFG>
|
|
<MMS>
|
|
<Max_Mms_Pdu_Length>32000</Max_Mms_Pdu_Length>
|
|
<Max_Calling_Connections>4</Max_Calling_Connections>
|
|
<Max_Called_Connections>0</Max_Called_Connections>
|
|
</MMS>
|
|
<Network>
|
|
<Clnp>
|
|
<Lifetime>50</Lifetime>
|
|
<Lifetime_Decrement>1</Lifetime_Decrement>
|
|
<Cfg_Timer>120</Cfg_Timer>
|
|
<Esh_Delay>5</Esh_Delay>
|
|
<Local_NSAP>49 00 01 53 49 53 43 09 01 01</Local_NSAP>
|
|
</Clnp>
|
|
</Network>
|
|
<Transport>
|
|
<Tp4>
|
|
<Max_Tpdu_Length>1024</Max_Tpdu_Length>
|
|
<Max_Remote_Cdt>4</Max_Remote_Cdt>
|
|
<Local_Cdt>4</Local_Cdt>
|
|
<Max_Num_Connections>8</Max_Num_Connections>
|
|
<Max_Spdu_Outstanding>4</Max_Spdu_Outstanding>
|
|
<Window_Time>10</Window_Time>
|
|
<Inactivity_Time>120</Inactivity_Time>
|
|
<Retransmission_Time>10</Retransmission_Time>
|
|
<Max_Transmissions>2</Max_Transmissions>
|
|
<Ak_Delay>2</Ak_Delay>
|
|
</Tp4>
|
|
<Tcp>
|
|
<Rfc1006_Max_Tpdu_Len>1024</Rfc1006_Max_Tpdu_Len>
|
|
<Rfc1006_Max_Num_Conns>8</Rfc1006_Max_Num_Conns>
|
|
<Rfc1006_Max_Spdu_Outstanding>50</Rfc1006_Max_Spdu_Outstanding>
|
|
</Tcp>
|
|
</Transport>
|
|
<NetworkAddressing>
|
|
<LocalAddressList>
|
|
<LocalAddress>
|
|
<AR_Name>local1</AR_Name>
|
|
<AP_Title>1 3 9999 33</AP_Title>
|
|
<AE_Qualifier>33</AE_Qualifier>
|
|
<Psel>00 00 00 01</Psel>
|
|
<Ssel>00 01</Ssel>
|
|
<Tsel>00 01</Tsel>
|
|
<TransportType>TCP</TransportType>
|
|
<!-- TP4 or TCP or TPX -->
|
|
</LocalAddress>
|
|
<LocalAddress>
|
|
<AR_Name>local1cl</AR_Name>
|
|
<AP_Title>1 3 9999 33</AP_Title>
|
|
<AE_Qualifier>33</AE_Qualifier>
|
|
<Psel>00 00 00 02 </Psel>
|
|
<Ssel>00 01</Ssel>
|
|
<Tsel>00 01</Tsel>
|
|
<TransportType>TCP</TransportType>
|
|
<!-- TP4 or TCP or TPX -->
|
|
</LocalAddress>
|
|
</LocalAddressList>
|
|
<RemoteAddressList>
|
|
<RemoteAddress>
|
|
<AR_Name>remote1</AR_Name>
|
|
<AP_Title>1 3 9999 23</AP_Title>
|
|
<AE_Qualifier>23</AE_Qualifier>
|
|
<Psel>00 00 00 01</Psel>
|
|
<Ssel>00 01</Ssel>
|
|
<Tsel>00 01</Tsel>
|
|
<NetAddr Type="IPADDR">127.0.0.1</NetAddr>
|
|
<!-- EXAMPLE: <NetAddr Type="IPADDR">208.176.40.52</NetAddr> -->
|
|
<!-- EXAMPLE: <NetAddr Type="NSAP">49 00 01 53 49 53 43 44 02 01</NetAddr> -->
|
|
</RemoteAddress>
|
|
</RemoteAddressList>
|
|
</NetworkAddressing>
|
|
</STACK_CFG>
|
|
<!--
|
|
#############################################################################
|
|
#
|
|
# Description of NETWORK parameters
|
|
#
|
|
# CLNP Only Parameters:
|
|
# ======================
|
|
#
|
|
# Lifetime
|
|
# Valid range is from 1 to 255 (in 500 ms units).
|
|
#
|
|
# Lifetime_Decrement
|
|
# Valid range is from 1 to 255 (in 500 ms units).
|
|
#
|
|
# Cfg_Timer The Configuration Timer specifies how
|
|
# often ESH will be sent.
|
|
# Valid range is from 0 to 32767 (seconds).
|
|
# Note that the Holding Time in ESH sent
|
|
# is set to 2*CfgTimer.
|
|
# If Cfg_Timer=0 then ESH will not be sent.
|
|
#
|
|
# Esh_Delay Delay time before first ESH is sent.
|
|
# Valid range is from 0 to 32767 (seconds).
|
|
#
|
|
# COMMON Parameters:
|
|
# ===================
|
|
#
|
|
# Local_MAC Local MAC address (up to 6 hex bytes
|
|
# separated by spaces).
|
|
# For the ADLC sub-network the local MAC is
|
|
# a required parameter and it has to match
|
|
# the address in the adlc.cfg file!
|
|
# For ADLC sub-network the MAC address is a
|
|
# USHORT number (2 hex bytes swapped,
|
|
# example: 30 00 hex swapped = 48 decimal).
|
|
# For the Ethernet this param will be read
|
|
# from the driver during initialization
|
|
# (any value from config file will be ignored).
|
|
#
|
|
# Local_NSAP Local NSAP (up to 20 hex bytes separated
|
|
# by spaces, example: 49 00 11 11).
|
|
# This is mandatory parameter.
|
|
#
|
|
#############################################################################
|
|
#
|
|
# Description of TRANSPORT parameters
|
|
#
|
|
# TP4 Only Parameters:
|
|
# ====================
|
|
#
|
|
# Max_Tpdu_Length
|
|
# Max length of TPDU. Base on SNPDU size.
|
|
# Valid values are: 128, 256, 512, 1024,
|
|
# 2048, 4096, 8192.
|
|
#
|
|
# Max_Remote_Cdt
|
|
# Max credits we can handle.
|
|
# Will allocate this many TPDU_DT structures.
|
|
# Valid values are: 2, 4, 8, 16.
|
|
# CRITICAL: MUST BE POWER OF 2.
|
|
#
|
|
# Local_Cdt Credit value we will ALWAYS send in ACK.
|
|
# We only accept in-sequence TPDUs so only
|
|
# purpose of this is to allow peer to send
|
|
# ahead.
|
|
# Valid range is from 1 to 15.
|
|
#
|
|
# Max_Num_Connections
|
|
# Max number of connections.
|
|
# Valid range is from 1 to 255.
|
|
#
|
|
# Max_Spdu_Outstanding
|
|
# Max num of SPDUs outstanding per connection.
|
|
# Will allocate this many SPDU_INFO structs
|
|
# for transmit queue.
|
|
# Valid values are: 2, 4, 8, 16.
|
|
# CRITICAL: MUST BE POWER OF 2.
|
|
#
|
|
# Max_Spdu_Length
|
|
# Max SPDU length.
|
|
# Should be based on max ACSE msg size.
|
|
# Valid range is from 1 to 65535.
|
|
#
|
|
# Window_Time
|
|
# Indicates the maximum time that the
|
|
# transport will wait before retransmitting
|
|
# up-to-date window information.
|
|
# Valid range is from 1 to 255 (seconds).
|
|
#
|
|
# Inactivity_Time
|
|
#
|
|
# Valid range is from 1 to 255 (seconds).
|
|
#
|
|
# Retransmission_Time
|
|
# Indicates the maximum time the transport
|
|
# will wait for acknowledgement before
|
|
# retransmitting a TPDU.
|
|
# Valid range is from 1 to 255 (seconds).
|
|
#
|
|
# Max_Transmissions
|
|
# Max number transmissions of a TPDU.
|
|
# Valid range is from 1 to 255.
|
|
#
|
|
# Ak_delay The TP4 skips some service cycles before
|
|
# sending the transport ACK, to allow
|
|
# concatination with DATA packet.
|
|
# The recommended value for this parameter is 2.
|
|
#
|
|
# TCP (RFC1006) only parameters:
|
|
# ==============================
|
|
#
|
|
# rfc1006_Max_Tpdu_Length
|
|
# Max length of TPDU.
|
|
# Valid values are: 128, 256, 512, 1024,
|
|
# 2048, 4096, 8192 and 65531
|
|
#
|
|
# rfc1006_Max_Num_Connections
|
|
# Max number of connections.
|
|
# Valid range is from 1 to 255.
|
|
#
|
|
# rfc1006_Max_Spdu_Outstanding
|
|
# Max num of SPDUs that can be queued in gensock2.
|
|
#
|
|
#############################################################################
|
|
#
|
|
# Description of ADDRESSING parameters
|
|
# Parameters for local and remote Directory Information Base (DIB)
|
|
#
|
|
# Common_Name Is an alias for the P-Address. It may be up
|
|
# to 64 characters long.
|
|
#
|
|
# AP-Title Is an array of up to 16 SHORT decimal integers.
|
|
# The first value should be 1 (ISO)(valid range 0-2).
|
|
# The second value should be 1, 2 or 3 (valid range 0-39).
|
|
# The third value is open for assignment (If you addressing is
|
|
# local this value should be 9999, the rest of the values are
|
|
# arbitrary.
|
|
#
|
|
# This is an Object Identifier assigned by the
|
|
# network naming authority, representing the
|
|
# Application Process Title for your particular
|
|
# application process.
|
|
#
|
|
# AE-Qualifier Is a LONG decimal integer.
|
|
#
|
|
# This is an optional integer value used to qualify the
|
|
# Application Entity.
|
|
#
|
|
# Psel Up to 16 (octets) characters of ASCII encoded hex.
|
|
#
|
|
# This octet string represents the Presentation Selector
|
|
# used to identify a Presentation SAP.
|
|
#
|
|
# Ssel Up to 16 (octets) characters of ASCII encoded hex.
|
|
#
|
|
# The octet string represents the Session Selector used
|
|
# to identify a Session SAP that can be up to 16 octets in length.
|
|
#
|
|
# Tsel Up to 32 (octets) characters of ASCII encoded hex.
|
|
#
|
|
# The octet string represents the Transport Selector used
|
|
# to identify a Transport SAP that can be up to 16 octets in length.
|
|
#
|
|
#
|
|
# Transport TP4 - for Transport Class 4
|
|
# TCP - for Transport Class 0 (RFC1006)
|
|
#
|
|
# TP4 only parameters:
|
|
# ====================
|
|
# NSAP Up to 20 characters of ASCII encoded hex
|
|
# TP4 only, in remote_begin section(s)
|
|
#
|
|
# TCP (RFC1006) only parameters:
|
|
# ==============================
|
|
# IPADDR IP address or alias name defined in hosts
|
|
# file for given IP address.
|
|
# Only in remote_begin section(s)
|
|
#
|
|
##############################################################################
|
|
-->
|